NEW VELOX Multilayer Partition wall – 42dB

Soundproofing of non-bearing VELOX partition walls are intended for use in rooms where the requirement for sound insulation is a minimum of 42 dB. Partition walls are created by a combination of two VELOX WS 25 boards sandwiching acoustic mineral wool.

A standard partition board's size is 2000 x 500 x 100 mm.

VELOX Partition boards can be used in any of the building systems currently available. Installation of partition walls starts by marking individual walls and openings. After the walls, floors and ceilings are marked, UW profiles 100 mm are fixed using suitable fasteners. For better sound insulation, it is possible to lay the profiles onto foam insulation tape. VELOX partition boards are then fitted into these profiles and adhered by low expanding polyurethane foam.The openings for windows/doors are framed again by UW 100 profiles. Lintel opening is also formed by using profile UW 100. Partition boards are laid in a brick pattern with a minimum overlap of 600 mm. For structural reasons, we recommend solid walls (without openings) to be supported every 5 meters with two UW 100 profiles with inserted insulation tape in between.

Surface treatment is recommended to perform in accordance with the design schedule (plasterboard or plaster) in thickness min. 15mm.

The better the building block, the better the building

Velox ICF forms are high-tech industry-leading insulated concrete forms that have proven technologies to make building easier and faster.

The Velox line of ICFs offer innovation that is exclusive to Velox, which allows builders the ability to build and design structures with greater efficiency.